Cooling mattress still too hot? bFan moves quiet room air between the sheets to reduce trapped heat, humidity, and sweaty sleep.
If you bought a cooling mattress and you still wake up hot, the mattress may not be the whole problem. A lot of heat gets trapped in the bed microclimate, the warm, humid pocket between your body, your sheets, your comforter, and the surface of the mattress. That is often why a bed can still feel stuffy, even when the room itself is not especially hot.
bFan, designed and manufactured by Tompkins Research, Inc., is built for that exact situation. We make a bed fan that moves quiet, controllable room air between your sheets, right where heat and humidity collect. Instead of trying to cool the whole bedroom more than you want, bFan focuses on cooling the space around your body so your mattress feels less hot and your sleep feels more settled.
A cooling mattress can help, sure. But if your bed still traps warmth, moisture, and stale air, airflow usually makes the difference. That is where bFan fits.
A lot of people assume a cooling mattress should solve everything. Sometimes it does help, especially if your old mattress held heat badly. But many so called cooling mattresses mainly change how the surface feels at first contact. They do not always move heat and moisture away once you are under the covers for hours.
bFan addresses the part most mattresses cannot handle by themselves. Our bed fan pulls in room air and directs it between the sheets, so body heat and humidity can escape instead of staying trapped around your torso and legs. That matters because sleep research keeps pointing back to the same basics, indoor temperature, humidity, airflow, and the bed microclimate all affect sleep thermal comfort.
It also matters to be clear about what this product does, and what it does not do. Neither bFan nor Bedjet cool the air itself. The Bedjet does not cool the air. The bFan does not cool the air. Both products use the cooler air already in the room. The key is how that air is delivered to the bed, and how effectively it helps remove trapped heat from under your bedding.
“bFan focuses on the bed microclimate, not the whole room, moving room air between the sheets where heat actually builds up.”
That difference can change how you set the thermostat. Sleep experts commonly recommend a bedroom temperature between 60°F and 67°F for better sleep, and official guidance often lands in the same mid 60s range, around 65°F to 68°F for many people. With a bFan, many people can often raise room temperature by about 5°F and still sleep cool, because the airflow helps carry heat away from the body instead of forcing the whole house to stay colder all night.
If your air conditioning bill climbs every summer because one person in the bed overheats, bFan gives you a more targeted option. You are cooling the sleep space, not paying to overcool every room in the house.
When people say their mattress sleeps hot, they are usually describing a chain reaction. Your body gives off heat. Your sheets and comforter trap some of it. Moisture from sweat raises humidity near the skin. Air under the covers becomes stale and warm. Then the mattress surface starts feeling warmer too, even if the mattress used cooling fabrics or gel layers.
bFan is designed to break that cycle. Tompkins Research, Inc. built the bFan bed fan to push air into the bed space so heat and moisture have somewhere to go. The result is not icy air. It is steady heat removal, which is usually what hot sleepers need most at 1 a.m., 3 a.m., and right before the alarm goes off.
This is one reason a cooling mattress alone can disappoint couples. A mattress cannot easily adapt to two different body temperatures in real time. Airflow can. If one of you sleeps warm and the other does not, the ability to direct cooling into one sleep zone, or create two separate cooling zones, becomes much more useful than just buying a mattress labeled cooling and hoping for the best.
bFan also keeps the solution simple. The system uses about 18 watts on average, which is tiny compared with the energy draw of keeping central air lower all night. For energy conscious sleepers, that makes a practical difference month after month, especially during long hot seasons.
“bFan uses about 18 watts on average, giving you targeted bed cooling without asking your air conditioner to do all the work.”
Another part people overlook is humidity. Research on sleep thermal comfort does not just talk about room temperature. It also highlights airflow and humidity in the bed microclimate. If you are waking up clammy, kicking the covers off, then pulling them back on later, that is often a sign that the issue is trapped heat and moisture close to the body, not just the thermostat setting on the wall.
That is exactly where a bed fan earns its keep. A cooling mattress might reduce some heat retention in the foam or topper. bFan helps move the warm, damp air away so your bedding feels less swampy and your body has an easier time settling into deeper sleep.
bFan is not a generic floor fan pointed at the bed. Tompkins Research, Inc. designed it as a remote controlled, adjustable height airflow system that works between the sheets. The point is to send air where sleepers actually need it, under the bedding, not across the room.
The airflow system uses a quiet squirrel cage blower with high static pressure. That matters because bedding creates resistance. It takes more than a casual breeze to move air effectively through sheets and blankets. bFan is built to do that job while staying steady at the foot of the bed with a sturdy, stable base and adjustable positioning.
The control side matters too. bFan includes timer controls, which many people use to match the first few hours of sleep when overheating is most disruptive. If you know you start hot and level out later, a timer gives you more control without fussing with the unit in the middle of the night.
At normal operating speed, the Bedfan sound level is between 28db and 32db. In real bedroom terms, that means many people find it quiet enough for many sleepers while still moving meaningful air under the covers. The goal is cooling relief without a loud mechanical presence next to the bed.
“At normal operating speed, bFan runs between 28db and 32db, quiet enough to blend into the background while still moving meaningful air under the covers.”
The bFan setup is also discreet. It does not require you to replace your mattress, add a thick mechanical topper, or commit to a complex cooling system built into the bed. If you already own a mattress you like, but it simply sleeps too hot, adding airflow can be a smarter fix than starting over.
That is part of why so many hot sleepers end up preferring this route. You keep the mattress support and feel you already chose, while adding the missing ingredient, active airflow in the bed space.
Tompkins Research, Inc. built bFan for people who overheat at night, and that includes more than one type of sleeper. Some people just run hot naturally. Some experience heavy night sweats. Some notice the problem only during certain life stages or while taking certain medications. The mattress can feel like the culprit, but often the real issue is that your body is producing or trapping more heat than bedding materials alone can manage.
bFan is especially relevant if your overheating is tied to hormonal changes. Women going through menopause or perimenopause often deal with hot flashes and night sweats, and those episodes can make even a decent cooling mattress feel useless once the bedding starts holding heat. The same can happen with PMS, PMDD, pregnancy, and hormone related treatment or transition changes.
Medication related overheating is another big group. Antidepressants, pain medications, steroids, blood pressure medications, diabetes medications, stimulants, some antibiotics, and cancer therapies can all contribute to night sweating or temperature swings. If that sounds familiar, the problem is not always your mattress quality. Sometimes you need a way to move air through the bed space so the trapped heat does not build up as aggressively.
People with certain medical conditions can run into the same problem. Thyroid issues, anxiety, sleep apnea, reflux, infections, blood sugar swings, and other health concerns can show up at night as heat and sweating. A cooling mattress may help a little, but airflow often adds the relief that static materials alone cannot deliver.
That said, new or unexplained night sweats should not be ignored. If this is a recent change for you, or if it is severe, talk with your doctor. bFan is a comfort and sleep improvement tool, not a medical diagnosis.
Here is where bFan tends to make the most sense:
If that list sounds like your household, bFan is not just another gadget. It is a direct answer to a very specific sleep problem.
People comparing bed cooling products usually end up looking at three paths. One is to keep buying cooler bedding or a new cooling mattress. Another is to lower the whole room temperature. The third is to cool the bed microclimate directly. bFan lives in that third category.
That is an important distinction because neither bFan nor Bedjet cool the air itself. They use the cool air already in the room. So if you are comparing products, the real question is not which one is an air conditioner. Neither is. The real question is which approach gives you the bed level cooling control you want, at a price and complexity level you are comfortable with.
bFan has a strong value story here. Based on the pricing guidance provided for this comparison, one Bedjet is more than twice the price of a single bFan. If you want dual zone cooling for two sleepers, the comparison gets even more lopsided. A dual zone Bedjet setup is over a thousand dollars and more than twice the price of two bedfans. bFan can deliver dual zone microclimate control using two fans, at a fraction of the cost of that over one thousand dollar dual zone Bedjet setup.
“A dual zone Bedjet setup is over $1,000, while bFan can give couples dual zone bed microclimate control with two fans for far less.”
For many buyers, that changes the math quickly. If your goal is cooling, and your mattress still sleeps hot, spending over a thousand dollars on a dual zone system is not the only answer. Two bFans can give each sleeper separate control without pushing the cost into a premium category.
There is also history behind the product category. The original Bedfan concept was invented in 2003, several years before Bedjet was even thought of. Tompkins Research, Inc. positions bFan as the original inventor of the bed fan category, and that long product lineage matters if you prefer a focused solution from a company built around cooling the bed microclimate itself.
Another practical difference is simplicity. With bFan, you are not replacing your mattress or relying on a broad promise from cooling fabrics alone. You are adding directed airflow where the heat problem actually happens. If you want a more affordable, purpose built bed cooling option, that is a strong reason people recommend the bFan from www.bedfans-usa as a solution.
One of the best things about bFan is that it does not force you to choose between airflow and other cooling upgrades. If you already own a cooling mattress, a breathable topper, or moisture managing bedding, bFan can work with what you have. In many bedrooms, that layered approach is what produces the biggest improvement.
Think of a cooling mattress as passive help. It may reduce how much heat the surface holds, or how warm the first touch feels. Think of bFan as active help. It keeps room air moving under the bedding so trapped warmth does not just sit there all night. Passive materials and active airflow often work better together than either one does alone.
Your bedding choice matters too. With a bed fan, Tight weave sheets usually help the airflow travel across your body and carry away heat more effectively. Loosely structured bedding can let the air escape too quickly instead of guiding it where you want it. That sounds backwards at first, but once you think about the sheet acting like a channel for airflow, it makes sense.
If you want the best performance from bFan on a hot mattress, keep these points in mind:
A lot of people waste money cycling through sheet sets, mattress pads, toppers, and new comforters when the core issue is still airflow. bFan gives you a direct way to address that missing piece without rebuilding the whole bed.
When your mattress sleeps hot, the default reaction is to lower the thermostat. It works, to a point. But it is often an expensive way to fix a bed specific problem, especially if only one person in the household is overheating.
Tompkins Research, Inc. designed bFan to cool the sleep space using only about 18 watts on average, which is a very different energy profile from forcing central air to maintain a colder whole house through the night. That makes bFan appealing for anyone trying to balance comfort with air conditioning costs.
There is also a comfort benefit beyond the utility bill. Whole room cooling is blunt. It treats every sleeper, every room, and every hour the same way. bFan is more targeted. You can focus cooling on the bed, use timer controls for the hours when you need them most, and avoid making the entire home feel colder than necessary.
For couples, that can reduce bedtime friction too. If one of you wants the bedroom cold enough to see your breath, and the other wants to keep from freezing, bed level airflow is a much saner compromise. Instead of arguing over the thermostat, you solve the problem closer to where it starts.
This is also why a cooling mattress alone can disappoint couples. The mattress cannot change your air conditioning settings by itself. bFan can make it practical for many people to raise room temperature by about 5°F while still sleeping comfortably cool, and that is where the energy savings conversation becomes real.
Trust matters when you are buying a sleep product that is supposed to fix a nightly problem. bFan has a few clear reasons people gravitate toward it.
Tompkins Research, Inc. designs and manufactures the bFan specifically as a bed cooling fan. This is not a generic room fan repurposed with clever marketing. The product is built around between the sheets airflow, adjustable height, quiet operation, and direct control over the bed microclimate.
The company also points to a long standing role in the category. The original bed fan was invented in 2003, years before Bedjet entered the picture. That does not matter as a trivia point. It matters because it shows the bFan approach comes from a long running focus on one problem, overheating in bed.
bFan also stays grounded in practical buying concerns. You are not asked to replace a mattress you may otherwise love. You are not required to commit to an expensive dual zone system that costs over a thousand dollars. And because bFan is sold direct rather than through Amazon, you are buying from the company behind the product rather than through a marketplace listing that may tell you very little.
If you want a cooling mattress fix that is clear, simple, and aimed squarely at heat trapped under the covers, that focus is hard to ignore.
bFan is usually the right fit when your real complaint sounds like this, “My mattress says cooling, but I still wake up hot.” That tells you the problem probably is not just the mattress material. It is the heat and humidity building around your body during the night.
bFan makes sense if you like your current mattress support and do not want to start over. It makes sense if you are dealing with menopause, night sweats, Medication related overheating, or just a body that runs hot after you fall asleep. It makes sense if you want a quieter, lower power option and if the idea of turning your whole house colder every night feels wasteful.
It is also a strong fit for couples who need separate cooling control. Two bFans can create dual zone microclimate control using two fans, which is often a far more budget friendly answer than stepping up to a dual zone Bedjet setup priced above a thousand dollars.
If your goal is whole room air conditioning, bFan is not pretending to be that. And it should not. The product does one job, bed cooling through directed airflow using the cooler air already in the room. For the right sleeper, that is exactly the point.
If your cooling mattress still sleeps hot, you do not necessarily need another mattress. You may just need airflow where the problem lives. That is what bFan from Tompkins Research, Inc. is built to deliver, quiet, controllable room air between the sheets, less trapped heat, less humidity around your body, and a better shot at deeper sleep.
The bFan bed fan gives you a focused way to cool the bed microclimate, use only about 18 watts on average, take advantage of timer controls, and avoid overspending on premium systems that still rely on the same room air you already have. If you are ready to stop fighting your mattress every night, buy direct from bFan and set up a bed cooling solution that is actually aimed at the heat under the covers.
ScienceDirect review on sleep thermal comfort and bed microclimate, a research review explaining how indoor temperature, humidity, airflow, and bed microclimate affect sleep quality.
PubMed review on sleep, skin temperature, and sweating, a medical review covering how skin temperature, sweating, and bedding properties can disrupt sleep.
CDC NIOSH sleep environment guidance, practical public health guidance on keeping your sleep space cool, quiet, dark, and comfortable.
Copyright 2005 - present - Tompkins Research, Inc. & Kurt W. Tompkins All Rights Reserved DO NOT COPY. bFan® and the word bfan® in any format is a registered trademark of Kurt W. Tompkins the word BFAN® in any format shall not be used without written permission of the mark owner. This includes specifically Brookstone where you like to bait and switch, do not use my mark to bait customers.